⇒ Auto Transformer provides voltage to the motor at start.
⇒ Appropriate lower voltage tapping –customized as per the application – is provided to the motor.
⇒ After the motor has attained significant torque changeover from Auto Transformer to On Line takes place.
⇒ Interlocking between stator and rotor as per ISS: 8544 (part III).
⇒ Offers improvements in reliability as compared to L.R.S..
⇒ Low maintence; incorporates switching through contactors.
⇒ Smooth acceleration of the slip-ring induction motor.
⇒ Provision of tripping automatically the Starter in case of overload, due to which it gives relief from the worry of burning the motor.
⇒ If there is phase short circuit or earthing in starter outgoing, then MCB of starter will trip automatically due to which fault doesn’t multiply.
⇒ Due to presence of rubber gasket starter is completely protected from dust, mud, water.
⇒ Provision of Starting Starter automatically when all the 3 phases are available, due to which maximum voltage is always available & will give freedom from starting & stopping again-n-again.
⇒ Due to presence of rubber gasket is completely protected from dust, mud & water.
⇒ Incoming & outgoing (3phase, Multi lock type) terminals are provided separately.
